To get the right replacement hardware for running boards on a 2001 Toyota Tacoma you need to know the exact manufacturer and model number of the running boards you have.
For example the Westin Signature Series Round Nerf Bars # 25-0835, which fits a 2001 Toyota Tacoma Regular Cab, uses Replacement Installation Hardware Kit for Westin Signature Series 3" Nerf Bars # 25-083PK.
If you let me know the manufacturer and part number of the running boards or nerf bars you have I can try and... view full answer...
I've linked our selection of nerf bars and running boards that fit your 2012 Ford F-150 SuperCrew.
One great item is the DeeZee 6 inch wide steps, part # DZ16121-16325. I've linked an install video of these on a 2014 F-150 for you. view full answer...
The Replacement Installation Hardware for Westin PRO TRAXX 5" Oval Nerf Bars # 21-5356PK is meant to fit the Westin PRO TRAXX Oval Nerf Bars # 21-54085 and the Westin PRO TRAXX Oval Nerf Bars # 21-53565. If these are your running boards then this is the correct hardware. view full answer...
The first thing that you will need to note is that Nerf Bars and Running Boards are vehicle specific. If the Westin Nerf Bars that you have were pulled off of a vehicle other than a 2007 Chevrolet Silverado 1500 New Body then there is a very good chance that they will not be compatible with your Chevy.
I did reach out to my contact at Westin who said that the 4" bars will fit your Crew Cab but the 5" bars are for an Extended Cab so they will not fit. If you do have bars that will fit your... view full answer...
I do have a solution for you to add steps to nerf bars/running boards on your 2014 Jeep Wrangler, but unfortunately there aren't any steps that will mount directly to the mounting bracket that you referenced.
Instead we have the Westin GenX Oval Nerf Bars with Hoop Steps # 20-3315 which come in a black powder coated steel that gives you a great OEM look. The step platforms measure 10" x 4" wide so they give you ample room for support in getting into your Wrangler.
I have attached an installation... view full answer...
I do have an alternate option for you to mount step bars to your 2010 Toyota 4Runner. But there is not a mounting kit available for the Westin Sure-Grip Running Boards # 27-6120 that fits your 4Runner.
Instead, you can use the Westin E-Series Nerf Bars # 23-3585, which come in a black powder coat finish and fits your 2010 Toyota 4Runner. view full answer...
You can easily identify if you have the crew cab or a quad cab by looking at the size of your rear doors. If they are the same size as your front doors, then you have a crew cab, if they are 3/4 the size then you have a quad cab.
I have also included an image showing this difference as well.
With that being said, if you have a crew cab, and the Westin E-Series Round Nerf Bars # 23-3560, you can use the:
-Replacement Installation Hardware Kit for Westin E-Series 3" Round Nerf Bars # 23-356PK.... view full answer...
In order to determine what replacement step pad for your running board, I would need to know what you currently have due to the replacements we carry being specific to the running boards.
We do have the Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001, however, which measures 21" long and 3" wide for the Westin E-Series Round Nerf Bars # 23-1400 that could work for you, but I can't say for certain. view full answer...
Yes, the Westin PRO TRAXX Oval Nerf Bars # W83DF you're looking at will work just fine. These running boards are custom fit to your vehicle with the included mounting hardware, and is made of mild steel. view full answer...
Sure thing!
Check out the:
-Replacement Mounting Brackets and Hardware for Westin 3" Round Nerf Bars # 23-195PK.
This is the replacement hardware for your Alpine Gear running boards (re-branded Westin E-Series) that will fit your 2006 GMC Sierra, and incudes all the brackets and hardware needed for a complete installation. view full answer...
We do have running boards and nerf bars confirmed to fit your 2013 Nissan Pathfinder. I've linked our selection but none of them are motorized. My favorite that we carry are the DeeZee NXc, part # DZ16201-16253. I like the large 5 inch wide step. view full answer...
For your 2007 Hummer H2 I recommend installing a set of nerf bars like the Aries Round Nerf Bars # AA204075. This is going to make getting in and out of your Hummer much easier for wife and will run the length of the cab so you'll have coverage to all doors. view full answer...
I spoke with Westin and they do not offer replacement hardware for your Westin HDX Nerf Bars with Drop Steps # 56-13525, unfortunately, the only way you could get replacement hardware is to purchase a new set of running boards. view full answer...
The nerf bars we carry for your 2015 Toyota RAV4 are Aries # AA202020 and # AA202020-2.
They're the same 3 inch round bars except # AA202020 has a black semi-gloss powder coat and # AA202020-2 is stainless steel. view full answer...
When looking for replacement mounting brackets for nerf bars, it truly depends on what model of Westin 3-Inch Nerf Bars. Also, it is important to note that replacement mounting brackets will only fit specific nerf bar models that are designed to fit specific years/makes/models of vehicles. This fact makes the process of buying secondhand nerf bars and running boards extremely frustrating.
If you have the compatible Westin E-Series Round Nerf Bars - 3" - Polished Stainless Steel # 23-2310... view full answer...
When it comes to installing The Westin Platinum Series Oval Nerf Bars # 24-54085 on your 2008 Dodge Ram Pickup it comes with the installation hardware.
If you need replacement hardware The Replacement Installation Hardware for Westin Platinum Series # 24-5408PK is the correct hardware needed.
The nerf bars are made out of a black powder coated steel that is long-lasting and rust resistance. The bars have a quick and easy bolt-on installation with included hardware. view full answer...
I have an answer for you. Unfortunately, I confirmed with my contact at Westin that the hardware created for the Westin Sure-grip Running Boards # 27-6600 are only created for Toyota 4Runners as far back as 2003. They do not produce the mounting hardware for your 2002 model.
With that being said, if you want running boards that comes with the installation hardware for your 2002 4Runner, I recommend the Westin Signature Series Round Nerf Bars # 25-1455. The Westin Signature Series comes... view full answer...
It looks like the closest step pad I was able to find is the Replacement Step Pad for Westin Signature Series Nerf Bars # 25-0001 which has 4 pegs that are 6" from the farthest peg to the inner pegs, and 6 1/2" between the inner pegs.
If you are able to let me know what running boards you have on your F-150, I'd be happy to see if we have a proper replacement. view full answer...
The Carr Transit Step for Cargo Vans - Side Door - Steel Platform # CARR451001 you're looking at would work fine, however if it were up to me I'd consider splurging a bit more for the Aries RidgeStep Running Boards w/ Custom Installation Kit # AA2055535.
Reason being, you get a longer, wider step for your wife to step onto which would minimize mis-stepping and potentially preventing future injuries. view full answer...
Go To Results